Model No.: 50-1000t/d
Three: Automatic Control System
(1) Degumming and Neutralization
mixer, reactor, heat exchanger, acid and alkali dosing device, separator, vacuum dryer, vacuum system
For specific kind and grade of crude oil , the degumming and neutralization process can be flexibly adjusted to improve product yield. Physical refining process is suitable for refining of high acid value oil. Efficient system of heat exchanging can reduce the consumption of steam significantly. Devices used in the process are all well sealed, which efficiently prevents air from entering and further avoids oil oxidation.
Bleaching earth feeder,Pre-mixer ,Bleaching tank,filter,Bleaching vacuum system
The oil from neutralization section is mixed with bleaching earth for removal of pigments. The bleaching earth is transported in pneumatic mode, thus efficiently alleviate environment pollution caused by dust. The precise feeding system is used to quantify the bleaching earth, which contributes to accurate measurement and easy operation.
Mechanical agitation is carried out in the bleaching tower to ensure complete contact between the bleaching earth and the oil. As a result, stable and reliable performance and great bleaching effect can be achieved. Then, the bleaching earth is filtered out in vertical pressure leaf filters. It`s worth mentioning that there are two leaf filters, which work alternatively to improve service life. The bleached oil will go through a security filter for precision filtration. In this way, qualified bleached oil will be obtained.
crystallizer, maturing tank, heat exchanger, cooler, horizontal filter, filter press, conveyor and feeding device for filter aid and auxiliary devices including refrigerant unit, refrigerant circulating system, compressed air system and circulating water system
Oils like sunflower oil or corn germ oil have waxes present in them. At low temperature, these waxes gives hazy appearance to oil, which is not liked by consumers. It is therefore essential to remove these waxes prior to bottling and marketing of oil.
In our dewaxing process, continuous crystallization and crystal growth help to improve dewaxing efficiency significantly, thus reducing energy consumption and production cost. The oil after dewaxing have high quality and can passes national standards and even some strict standards.
deodorization tower, fatty acid collecting system, vacuum system, heat exchanger, cooler, canned motor pump and auxiliary devices including high pressure Steam Boiler (thermal oil furnace) and circulating water system
Every vegetable oil has its own distinct natural odour. In addition, extra unpleasant odour is imparted to the oil during degumming and bleaching processes. Hence, it is essential to remove the odour from the bleached oil.
In the deodorization section, deodorization tower used is made up with filling plates and column trays to accommodate deodorization of various oils, especially physical refining process. During deodorization, steam jet vacuum pump is sharply cooled by circulating cool water, thus creating a high vacuum status, which helps to carry away odoriferous matter to the barometric condenser and reduces steam consumption and waste water emission. As a result, production environment will be improved and less installation space will be required. Furthermore, based on quality of crude oil, technological parameters of the process can be flexibly adjusted to prevent formation of trans-fatty acids.
(5) Crude Oil Filtration
leaf filter (vertical and horizontal), oil pump, storage tank, compressed air system
The process is designed to remove particulate matter from crude oil prior to refining process. Hence, product yield and quality are greatly improved for sequential processes. It is very convenient and easy to upload the particles since the process features high level of mechanization. There are two filters, which work alternatively to extend service life.
(6) Phospholipid Concentration and Drying
conditioning tank, film evaporator, vacuum system, phospholipid cooling device, phospholipid delivery pump, storage tank
The film evaporator adopted features high precision rotor and shell, large heat transfer coefficient, great evaporation intensity, low evaporation temperature and short staying time of materials. The vacuum system is designed with dividing-wall condensing system, which prevents waste water emission and therefore eliminate environment pollution.
(7) Automatic Control System
In the master control room, an efficient, stable and advanced DCS control system is equipped, which consists of operation station, control station and communication network.
The control system is characterized by high reliability, stability, great resistance to disturbance. It is also designed with features of remote monitor and fault diagnosis.
Every stage of the whole production line is dynamically and clearly displayed on the computer screen at the operation station. User-friendly human machine interface contributes to great convenience. Users can start or stop motors and electrical equipment just using the computer. In addition, it is very convenient to print relevant reports when it is required.
Acquisition and control of parameters are all accomplished by the programme written in the control station. In this way, operation station only undertakes things such as operation, parameter display, data record and data storage. As for important parameters, the control system is able to ensure automatic control, data storage and alarm when values of these parameters exceed preset limit values.
PROFIBUS field bus network ensures rapid and reliable communication. Open ODBC and OLE standard interfaces are also equipped in the control system, which facilities communication with the host computer and other control systems.
We also provide the following project and equipment:
Oilseed Pretreatment Project
Oilseed Pressing Project
Oil Extraction Project
Oil Refining Project
Cottonseed Miscella Refining Project
Low Temperature and Edible Soybean Meal Project
Soy Protein Concentrate Project
Soy Protein Isolate Project
Cottonseed Protein Project
Full Fat Soybean Powder Project
ASME Pressure Vessel
ASME Heat Exchanger
Shandong ChemSta Machinery Manufacturing Co.,Ltd. is a national high-tech enterprise, which is invested and controlled by Jining Machinery Design and Research Institute.It integrates scientific research, manufacturing, installation and service together.
Located in high-tech development zone of Jining city of Shandong province, our company is close to Mountain Tai in the north and next to Weishan Lake in the south. Beijing-Shanghai high-speed railway and Grand Canal all run through the city. There is expressway connecting our company directly to Qingdao port. In addition, Jining airport has opened multiple airlines to Beijing, Shanghai and Guangzhou. To sum it up, the traffic is very convenient.
Now, there are about 460 employees in our company. Our technical staff consists of 5 application researchers, 56 senior engineers and 46 engineers. Fixed assets we own worth 180 million yuan in total. Cover area of our factories reaches 66,000 square meters.
We insist on the concept that sustainable development can be ensured by thinking from customers` perspectives. With 30 years experience of Oil production technology and enterprise management, we are capable of providing mature and high quality products. Meanwhile, we pay more attention on technology research and development for energy conservation, environment protection, control system intelligence to create more customer value and improve user experience. In addition, we will train operators at the production site and teach operating instructions until they can ensure normal operation of the production lines on their own.
As for our technology achievements, we have won national important new products award, national torch program award, mechanical industry technology progress award, over 30 items of national patent for utility models and software copyright. Our company has been successively rated as provincial engineering technology research center for production of grain and oil processing equipment and provincial enterprise technology center.
As an international supplier for vegetable oil equipment and vegetable protein equipment, our company has built up great reputation in the industry of oil and protein. We provide vegetable oil production lines, refining lines, low temperature soybean meal production lines, soybean protein concentrate production lines, soybean protein isolate production lines, cottonseed protein production lines, natural pigment extraction lines and production line for harmless disposal of dead livestock and poultry. In addition, we also offer large-scale drying machines, chemical pressure vessels, electrical control systems, common mechanical equipment.
With excellent processing equipment, complete manufacturing system, professional manufacturing and installing teams, we have successfully established over 200 vegetable oil production plants and vegetable protein production plants for our customers. Our production lines and relevant pressure vessels have been successfully sold to many countries such as Russia, America, Canada, Vietnam, Pakistan, the Philippines and Thailand and they have been very well received by our customers. We sincerely welcome users from all over the world to visit our company and discuss about cooperation with us.